Water Heater Repair

Richards Rooter and Plumbing offers affordable, Water Heater repair, Tankless Water Heater repair, Plumbing repairs, Sewer Cleaning, Drain Cleaning, Sewer Video Inspection and Locating, Sewer and Drain Locating and repair Services since 1994. If your drains are clogged and you need help fast, all you need to do is call us for help. Most drains have a clean-out which is an access point for snaking and clearing the sewer or drain line. Clogged drains, sewers and plumbing problems can bring your home to a halt. That's why we offer 24hr plumbers on call for Gas leaks, Plumbing repairs, Sewer Cleaning, Drain Cleaning, Water Heater repair, Tankless Water Heater repair, Sewer Video Inspection and Locating, Sewer and Drain Locating and repair. Plumbing services and maintenance 24/7. Call 1 (310) 853-5200 for an appointment. Yes we can clear that Sunday or Saturday backups or stoppages so you don't have to miss work during the week. If your Water Heater or Tankless Water Heater is not working, Call Richards Rooter and Plumbing for Service and Repair. Water Heater repair starting at $99.00 in Los Angeles. This price applies to residential properties only. Since 1994 Richards Rooter and Plumbing has been repairing and replacing Water Heaters. Most of the time only repairs are needed but if you need a new water heater, we install all kinds of Tankless and conventional Water Heaters. Clogged drains, sewers, water heaters and plumbing problems can bring your home to a halt. That's why we offer plumbers, drain cleaning, plumbing services and maintenance 24/7. Call 1 (310) 853-5200 for an appointment now.

Call us at 1 (310) 853-5200
Contractor State Plumbing Contractor License #689913

Water Heater Repair or Installation in Los Angeles

Water Heater Repair Los Angeles
Water Heater Repair Los Angeles

Why Water Heater and Pipes Corrode

Electrolytic corrosion sometimes called electrolysis and galvanic corrosion, often referred to as two-metal or dissimilar metal Corrosion, are somewhat similar in nature but result from different causes. Electrolytic Corrosion results from the action of an imposed direct current. Galvanic corrosion results from self induced currants which in turn have resulted from the electrical potential between two dissimilar metals in contact.

As apply to piping or structural installations in which copper is a part, electrolytic Corrosion from stray currents can almost be disregarded. The passing of the street railway, with its high amperage direct current, has virtually eliminated the stray current possibility. It has sometimes been thought that grounded telephone or electric power wires my cause electrolytic corrosion, but several investigation who disproved this theory.

For galvanic corrosion to occur, dissimilar metals must be Connected in the presence of an electrolyte. Salt water and acid solutions are excellent electrolytes. A perfect example of a salt solution would be a water softener system installed. Ordinary fresh potable water is a weak electrolyte, and distilled water or condensate, extremely weak electrolytes. Steam will not act as an electrolyte at all. The weaker is electrolyte, the more limited the galvanic action. It should be emphasized that with fresh water, galvanic corrosion is not common often any form of corrosion not clearly understood is wrongly labeled electrolysis, electrolyte take action, or galvanic corrosion.

To study the problem, the various metals have been listed in what is known as the galvanic series. One end of the series is most noble, the other, least Noble. The least noble and includes metals that are I know as anodic toward those further up the scale. This means they are corroded because, when joined two metals higher in the scale, they are electro-negative. The self generated current levels the less noble or and anodic metal to enter the electrolyte and it carries the metal with it. In other words the anode leaches into the solution.

Metals near the more noble are Cathodic and electro-positive with respect to the less noble metals with which they may be joined. This protects them from corrosion. Current enters the metal from the electrolyte and may deposit on the Cathodic metal, the metal it has corroded from the Anodic metal.

More commonly, however, the corroded metal deposits or precipitates out of the solution as a compound mixed with minerals from the water. The Cathodic metal also is protected by its positive potential.


Plumbing Contractor State License #689913
Richards Rooter and Plumbing
Plumbers, Plumbing Contractor and Drain Cleaning Services
Address :
1131 Alta Loma Rd, #429,
West Hollywood,
California - 90069
Los Angeles.
Tel : 310-853-5200
Fax : 800-420-2003
Email : info@plumbingemergencylosangeles.com/
Published by Richard Yazmajian Written by Richard Yazmajian